Flex-Tred® 2″ x 24″ Strips (50/carton)

Product Description

Quick and easy to apply. Installs in seconds on any dry, clean, smooth surface. Just remove the protective liner from the underside to expose the special pressure-sensitive adhesive, then apply in the proper position and roll or press in place.

Each piece has a heavy coating of pressure-sensitive adhesive especially formulated for a superior bond to practically any clean, dry, smooth surface.

Flex-Tred® Anti-Slip Safety Tape provides:

  • Anti-slip from any direction, wet or dry, cuts risks of slips or falls
  • Economical
  • Resistant to solvents
  • Durable
  • Indoor and outdoor applications

Flex-Tred® Specifications

  • Flexible: Flex-Tred® bends over sharp 90 angles without fracture. Repeated bending without cracking or failure of bond.
  • Application: Substrate temperature must be above 50°F.
  • Temperature Limits: Applied Flex-Tred® has a useful temperature range of -40°F to 220°F. However, limited exposure to temperatures above 220°F will not harm Flex-Tred®.
  • Steam Cleaning: Applied Flex-Tred® will tolerate steam cleaning.
  • Detergent Cleaning: Applied Flex-Tred® will tolerate detergent cleaning.
  • Environmental Resistance: Flex-Tred® is essentially unaffected by climactic exposure and mild acid or alkali exposure under normal conditions.
  • Shelf Life: Flex-Tred® shelf life is two years minimum.
  • Resistance: Motor Oil – Detergent – Hydraulic Oil – UV Resistance
  • Peel Adhesion: MIL-D-17951E(SH): Adhesive strength 0.75 lbs. (minimum) MIL-W-5044C: Adhesion lb./in. Width Type IV – 3 lbs. (minimum)

Flex-Tred® Coefficient of Friction

Flex-Tred® Improves Coefficient of Friction of Most Surfaces in Wet or Dry Use

Coefficient of friction tests run per specification Mil-D-17951E (ships) using rubber test vehicle. Higher numbers indicate better coefficient of friction.

COMPARISON OF VARIOUS SURFACES: STATIC COEFFICIENT OF FRICTION

Dry Surface
Test Results
Wet Surface
Test Results
FLEX-TRED SURFACES
Flat Black Coarse 1.33 1.21
Sparkle Black 1.24 1.06
Blue Medium 1.29 1.09
Flat Black Fine 1.37 1.17
Ocean Grey 1.30 1.02
OTHER SURFACES
Ribbed Rubber .89 .76
Scotch Tred .69 .50
Painted Steel .77 .69
Textured Vinyl .80 .64
Ribbed Vinyl .85 .72

Flex-Tred meets or exceeds specifications for: Mil-D-17951E(ships); Motor Vehicle Safety Standard No. 302; Walkway Matting, Non-slip Mil-W-5044C, Type IV; ADA, ASTM, and OSHA.

Part Numbers

Flat Black Fine FBF.0224
Flat Black Medium FBM.0224
Flat Black Coarse FBC.0224
Sparkle Black SB.0224
Marine Black MAR.0224
Safety Yellow SAF.0224
Pebble White PEB.0224
Industrial Red INR.0224
Industrial Brown INB.0224
Teak Brown TEA.0224
Carribean Blue CAR.0224
Scarlet Red SCA.0224
Ocean Gray OCE.0224
Yellow/Black Striped YBS.0224
Niteglow GLO.0224
Clear Fine CLF.0224
Clear Course CLC.0224
Available in all Flex-Tred® Colors

Download our catalog

Check out the Wooster Products Inc. catalog to find additional information and specs for our full line of anti-slip safety stair and walkway products.