Abrasive Cast Thresholds

“Wooster” anti-slip abrasive cast thresholds are cast to order
from a large selection of architectural designs as shown.
They are of highest quality and heavy duty construction
in either ALUMOGRIT® (abrasive cast aluminum)
or FERROGRIT® (abrasive cast iron).

Specify abrasive castings for:
Maximum Durability in Rough Use
Indoor or Outdoor Use
Resistance to Unusually Corrosive Environments
Anti-Slip Safety Properties
Ready to Install Convenience
New Construction or Existing Buildings

Specifications / Guidelines for Installation / Fasteners
Leed(Alumogrit®) / Leed(Ferrogrit®)

anti-slip abrasive cast thresholds

FASTENERS: Thresholds are drilled and countersunk for 1/4″ screws unless other fasteners are specified.
NOTCHING: Threshold ends can be factory notched for jobsite installation if frame details are furnished.
LENGTHS: Lengths to order up to 6’0″ in Ferrogrit® and up to 8’6″ in Alumogrit® in one piece. Longer lengths will be furnished in equal sections.

Saddle Types (Meets A.D.A. Requirements)
110T
Type 110 – Standard height 3/8″. Standard widths 4″,5″, & 6″.
Fluted abrasive surface is standard.
Other heights, widths, and plain abrasive or cross hatched abrasive to order.
Get: specsheeticonor app-icon or dwg-icon or dxf-icon


111
Type 111 – Standard height 9/16″. Standard widths 4″,5″, & 6″.
Fluted abrasive surface is standard.
Other heights, widths, and plain abrasive or cross hatched abrasive to order.

Get: specsheeticonor app-icon or dwg-icon or dxf-icon


114
Type 114 – Standard height 3/8″. Standard widths 4″,5″, & 6″.
Fluted abrasive surface is standard.
Other heights, widths, and plain abrasive or cross hatched abrasive to order.

Get: specsheeticonor app-icon or dwg-icon or dxf-icon


115
Type 115 – Standard height 1/2″. Standard widths 4″,5″, & 6″.
Fluted abrasive surface is standard.
Other heights, widths, and plain abrasive or cross hatched abrasive to order.

Get: specsheeticonor app-icon or dwg-icon or dxf-icon


115m
Type 115M – Standard height 1/2″. Standard widths 4″,5″, & 6″.
Fluted abrasive surface is standard.
Other heights, widths, and plain abrasive or cross hatched abrasive to order.

Get: specsheeticonor app-icon or dwg-icon or dxf-icon


threshold-install

Stop Types
112
Type 112 – Standard widths 4″,5″, & 6″. Height under door 5/8″.
Other widths, heights and intermediate dimensions to order.
Plain abrasive surface.
Get: specsheeticonor app-icon or dwg-icon or dxf-icon


113
Type 113 – Standard widths 4″,5″, & 6″. Height under door 3/8″.
Other widths, heights and intermediate dimensions to order.
Plain abrasive surface.

Get: specsheeticonor app-icon or dwg-icon or dxf-icon


115S
Type 115S – Standard widths 4″,5″, & 6″. Height under door 1/2″.
Other widths, heights and intermediate dimensions to order.
Plain abrasive surface.

Get: specsheeticonor app-icon or dwg-icon or dxf-icon


Hook Strip Types
Styles of Hookstrip furnished with Types 109 & 119. Specify Style.
hookstrips

109
Type 109 – Standard widths 4″,5″, & 6″. Height 1/2″.
Other widths, heights and intermediate dimensions to order.
Fluted abrasive surface.

Get: specsheeticonor app-icon or dwg-icon or dxf-icon


119
Type 119 – Standard widths 4″,5″, & 6″. Height 5/8″ only.
Other widths and intermediate dimensions to order.
Fluted abrasive surface.

Get: specsheeticonor app-icon or dwg-icon or dxf-icon